POWER FLUSHING IN Hurst

POWER FLUSHING IN Hurst

Power Flushing will flush your central heating system using a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is clogging your central heating system.

The process that we normally carry out does not use the “traditional” method of power flushing a central heating system, which can cause old pipes to leak because of high pressure being pumped into the central heating system. 

As a proud accredited company for Adey Magnaclense, we are able to offer a one-off cleanse, using the most up-to-date technology to ensure your radiators heat up properly. This process helps to improve the life-expectancy of the whole of your central heating system, keeps your heating bills low and reduces the risk of breakdowns.

Central Heating System Power Flushing from Avenue Heating

Why you may need a Power Flush

Central heating power flushing helps deal with heating problems that you cannot always see, and creates a more efficient heating system.

system flush 1

Reduced Efficiency

Limescale, sludge, and rust cause leaks and blocked pipes. Dirty water in your pipes reduces the efficiency of your heating system..

system flush 2

Radiator Cold Spots

Sludge build-up causes cold spots in your radiators. This means they have to work harder to heat a room and you waste more energy.

system flush 3

Boiler Breakdowns

A clogged boiler and pump causes breakdowns. 87% of boiler breakdowns are due to dirty water in your central heating system.

SAVE ENERGY. SAVE MONEY.

What are the benefits to having a central heating power flush?

Heating System Power Flushing from Avenue Heating

How does Power Flushing work?

Power Flushing Hurst

Before a Power Flush

The sludge in your radiators creates cold spots so the heat cannot flow around them effectively.

Power Flushing Hurst

During a Power Flush

We will use a machine and three-step chemical process to fully clean out your boiler, pipes and radiators, and replace dirty sludge with clean water.

Power Flushing Hurst

Boiler Breakdowns

After the Power Flushing has removed sludge from your pipes, radiators and boiler, your system should work much better.

Central Heating System Power Flushing - Avenue Heating

Protecting your Central Heating System for the Future

When a central heating system and boiler has been power flushed, they are restored to their original level of efficiency. If your system is clogged up with sludge and dirt over a period of time, it cannot perform to its maximum potential to heat your home. A heating system clean gives your home many benefits and savings.

Once your heating system has had power flushing, it’s essential that it remains like this to avoid more expenses in the future. Inhibitors are added as part of every flush, but can dilute overtime as a result of small leaks or refilling radiators.

To decide whether power flushing is the right solution for you, our engineers are happy to talk to you about the process with you, examine your system and suggest the best solution.

Book Power Flushing TODAY. Call Us on 020 3137 3333

System Sludge!

A by-product of the chemical reaction between metals and liquids is sludge. As this deposit builds up in the bottom of radiators, as the water flows around it, it slowly causes cold spots on radiators and blocks piping.

Your heater’s boiler and pump are put under stress when this occurs by restricting the flow of circulating water. As a result, it is less effective, less efficient, and will not last as long.

By having central heating power flushing you can clear the sludge built up in your system over time.

Central Heating System Power Flush - Avenue Heating

CENTRAL HEATING POWER FLUSHING IN Hurst

If we sounds like the kind of company that you would like to have working in your home in Hurst, please don’t hesitate to get on contact today! Call 0203 137 3333 or just fill in the form below and we will contact you to discuss your needs!

OUR SERVICES

Avenue Heating are able to assist you with all of your homes plumbing and heating needs.

OUR WORK

Don't take our word for it, take a look at what our customers say about working with us.

PRICING

We provide estimates before work starts. Our invoices will always show a full breakdown of costs.

GET IN TOUCH

We cover Watford, Rickmansworth, Chorleywood, St.Albans, Finchley, Harrow and surrounding areas

FAQs

Avenue Heating will power flush your heating system using a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is inside your heating system.

The type of process that we usually carry out doesn’t use the “traditional” method of power flushing a heating system, which can cause old pipes to leak because of high pressure being pumped into the system. 

As a proud accredited company for Adey Magnaclense, we can offer a one-off cleanse, using the most up-to-date technology to make sure your radiators heat up properly. This process helps to increase the life-expectancy of the entire system, keeps your heating bills lower and reduces the risk of breakdowns. 

There will be a few signs that you need power flushing, below is a list of the most common signs that you possibly need to have your central heating system flushed:

  • Loud noises from your boiler
  • Loud heating system
  • Kettling noise coming from your boiler
  • Cold spots on your radiators, particularly on the bottom
  • Your boiler breaks down and regularly needs restarting
  • Your central heating pump or boiler are making excessive noises
  • Your central heating system progressivly starts to take longer to heat up
  • Some of your radiators take longer to heat up than others
  • When you bleed your radiators the water is dirty or black
  • When bleeding your radiators no air comes out
  • Your radiators do not get warm even when the boiler is on

It is recommended that you should have your heating system flushed every four to five years. When you have a new boiler installed, depending on the water quality of your system, it may be necessary to carry out a full flush at that point.

The time it takes to flush a system depends largely on the size of the property and how blocked or dirty the system is. The larger the system and the more sludge there is, the longer it will take. We take pride in the quality of our work and will flush your system for as long is required to clean the system and will work on each individual radiator to specifically ensure each one is clear of blockages.

To give an indication, a property with a system consisting of fifteen radiators will take a whole day to complete.

It is advised that your flush is carried out by a qualified professional. All of our engineers are fully qualified and take part in ongoing manufacturer training to ensure that their skills and knowledge are always up to highest of standards.

The cost of a flush of your heating system varies and is individually quoted to reflect your home’s unique system composition.

To get a no obligation quote for the cost of flushing your heating system, call us today on 0203 137 3333 or just click below and we will contact you to discuss your requirements!