POWER FLUSHING IN Radlett

POWER FLUSHING IN Radlett

Power Flushing flushes your central heating system using a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is laying inside your central heating system.

The method that we normally carry out doesn’t use the “traditional” method of power flushing a central heating system, which can cause old pipes to leak because of high pressure being pumped into the central heating system. 

As a proud accredited company for Adey Magnaclense, we can offer a one-off cleanse, using the most up-to-date technology to make sure your radiators heat up properly. This process helps to increase the life-expectancy of the whole of your central heating system, keeps your heating bills down and reduces the risk of breakdowns.

Central Heating System Power Flushing from Avenue Heating

Why you may need a Power Flush

Central heating power flushing can resolve any heating issues you can’t see, and creates a more efficient heating system.

system flush 1

Reduced Efficiency

Sludge, rust and limescale causes leaks and blocked pipes. Dirty water in your pipes causes heating problems and reduces efficiency.

system flush 2

Radiator Cold Spots

Sludge build-up causes cold spots in your radiators. This means they have to work harder to heat a room and you waste more energy.

system flush 3

Boiler Breakdowns

A clogged boiler and pump causes breakdowns. 87% of boiler breakdowns are due to dirty water in your central heating system.

SAVE ENERGY. SAVE MONEY.

What benefits do you gain from having central heating power flushing?

Heating System Power Flushing from Avenue Heating

How does Power Flushing work?

Power Flushing Radlett

Before a Power Flush

The sludge in your radiators creates cold spots so the heat cannot flow around them efficiently.

Power Flushing Radlett

During a Power Flush

We’ll use a machine and three-step chemical process to thoroughly clear out your boiler, pipes and radiators, and remove all of the dirty sludge and replace with fresh clean water.

Power Flushing Radlett

Boiler Breakdowns

After the Power Flushing has removed sludge from your pipes, radiators and boiler, your system should work much better.

Central Heating System Power Flushing - Avenue Heating

Your Central Heating Protected for the Future

When a central heating system and boiler has been power flushed, they are restored to their usual level of efficiency. If your system has become clogged up with sludge and dirt over a period of time, it can’t perform to its maximum potential to heat your home. A heating system clean gives your home many benefits and savings.

After your heating system has had power flushing, it’s crucial that it stays like this to avoid additional expenses in the future. Inhibitors are added as part of every flush, but can dilute overtime as a result of small leaks or refilling radiators.

To determine whether power flushing is the right solution for you, our experts are happy to chat about the process with you, examine the system and suggest the best solution.

Book Power Flushing TODAY. Call Us on 020 3137 3333

System Sludge!

Chemical reactions between metals and liquids produce sludge as a by-product. These deposits accumulate in the bottom of radiators, causing cold spots on radiators and blocking piping as the water flows around them.

By restricting the flow of circulating water, this puts your heater’s boiler and pump under stress. Because of this, it’s less effective, less efficient, and it won’t last as long.

By having central heating power flushing you can clear the sludge built up in your system over time.

Central Heating System Power Flush - Avenue Heating

CENTRAL HEATING POWER FLUSHING IN Radlett

If we sounds like the type of company that you would like to have working in your home in Radlett, please don’t hesitate to get on contact today! Call 0203 137 3333 or just fill in the form below and we will contact you to discuss your requirements!

OUR SERVICES

Avenue Heating are able to assist you with all of your homes plumbing and heating needs.

OUR WORK

Don't take our word for it, take a look at what our customers say about working with us.

PRICING

We provide estimates before work begins. Our invoices will always show a full breakdown of costs.

GET IN TOUCH

We cover Watford, Rickmansworth, Chorleywood, St.Albans, Finchley, Harrow and surrounding areas

FAQs

Avenue Heating will power flush your heating system using a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is built up in your heating system.

The type of process that we usually carry out doesn’t use the “traditional” method of power flushing a heating system, which can cause old pipes to leak because of high pressure being pumped into the system. 

As a proud accredited company for Adey Magnaclense, we can offer a one-off cleanse, using the most modern technology to ensure your radiators heat up correctly. This process helps to increase the longevity of the whole of your system, keeps your heating bills lower and reduces the risk of breakdowns. 

There will be a few signs that you need power flushing, below is a list of the most typical signs that you will need to have your central heating system flushed:

  • Banging noises from your boiler
  • Loud heating system
  • Kettling noise coming from your boiler
  • Cold spots on your radiators, particularly on the bottom
  • Your boiler breaks down and regularly needs restarting
  • Your central heating pump or boiler are making unuaual noises
  • Your central heating system progressivly starts to take longer to heat up
  • Some of your radiators take longer to heat up than others
  • When you bleed your radiators the water is dirty or black
  • When bleeding your radiators no air comes out
  • Your radiators do not get warm even when the boiler is on

It is recommended that you should have your heating system flushed every four to five years. When you have a new boiler installed, depending on the water quality of your system, it may be necessary to carry out a full flush at that point.

The time it takes to flush a system depends largely on the size of the property and how blocked or dirty the system is. The larger the system and the more sludge there is, the longer it will take. We take pride in the quality of our work and will flush your system for as long is required to clean the system and will work on each individual radiator to specifically ensure each one is clear of blockages.

To give an indication, a property with a system consisting of fifteen radiators will take a whole day to complete.

It is advised that your flush is carried out by a qualified professional. All of our engineers are fully qualified and take part in ongoing manufacturer training to ensure that their skills and knowledge are always up to highest of standards.

The cost of a flush of your heating system varies and is individually quoted to reflect your home’s unique system composition.

To get a no obligation quote for the cost of flushing your heating system, call us today on 0203 137 3333 or just click below and we will contact you to discuss your requirements!